Dash Disassembly - Metra 95-7355B Instrucciones De Instalación

1. Using soft panel tools, unsnap
and remove the center dash panel
surrounding the radio, disconnecting
the necessary harnesses. (Figure A)
2. Remove two screws from the two
vents surrounding the factory radio and
remove them both. (Figure B, C)
(Figure A)

Dash Disassembly

(Figure B)
(Figure C)
95-7355B
3. Remove the four screws securing the
factory radio and remove it from the
dash. (Figure D)
Continue to kit assembly
2
(Figure D)