Kit Assembly - Metra 95-7355B Instrucciones De Instalación

Double DIN radio provision
1. Attach the brackets to the radio
housing trim panel using the (2)
#6 x 3/8" screws supplied.
(Figure A)
2. Slide the double DIN radio into the
bracket/radio housing trim panel
assembly and secure with the
screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
4. Reassemble dash in reverse order
of disassembly.

Kit Assembly

(Figure A)
95-7355B
(Figure B)
3