NOTE:
When the battery power is low, the device emits a warning tone and displays a
•
low battery power message.
If the battery is completely discharged, the device cannot be turned on
•
immediately when the charger is connected. Allow a depleted battery to
charge for a few minutes before turning on the device.
If you use multiple applications at once, network applications, or applications
•
that need a connection to another device, the battery will drain quickly. To
avoid disconnecting from the network or losing power during a data transfer,
always use these applications after fully charging the battery.
The device can be used while it is charging, but it may take longer to fully
•
charge the battery.
If the device receives an unstable power supply while charging, the touch
•
screen may not function. If this happens, unplug the charger from the device.
While charging, the device may heat up. This is normal and should not affect
•
the device's lifespan or performance. If the battery gets hotter than usual, the
charger may stop charging.
After fully charging, disconnect the device from the charger. First unplug
the charger from the device, and then unplug it from the electric socket.
Do not remove the battery before removing the charger. This may damage
the device.
NOTE: To save energy, unplug the charger when not in use. You must unplug
the charger from the electric socket when not in use to avoid wasting power.
The device should remain close to the electric socket while charging.
17