Gemini UMX-3 Manual De Funcionamiento página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

NOTE
NOTE: Keep track of where you position
NOTE
: Keep track of where you position
: Keep track of where you position
: Keep track of where you position
NOTE
NOTE
: Keep track of where you position
the input assign switches. To avoid
the input assign switches. To avoid
the input assign switches. To avoid
the input assign switches. To avoid
the input assign switches. To avoid
confusion, move the switch to a position
confusion, move the switch to a position
confusion, move the switch to a position
confusion, move the switch to a position
confusion, move the switch to a position
near the corresponding printing on the
near the corresponding printing on the
near the corresponding printing on the
near the corresponding printing on the
near the corresponding printing on the
faceplate.
faceplate.
faceplate.
faceplate.
faceplate.
5 . CHANNEL SLIDE CURVE SWITCHES: Use the 3 position CHANNEL
SLIDE CURVE (28)
SLIDE CURVE (28) switches to adjust the kind of curve the channel
SLIDE CURVE (28)
SLIDE CURVE (28)
SLIDE CURVE (28)
slides have. Move the selected channel slide curve switch to the 6 (top)
position to make the increase in level gradual and even. Move the
channel slide curve switch to the 20 (center) position to make the
increase in level less gradual as you move channel slide up. Move the
channel slide curve switch to the 30 (bottom) position to make the
increase in level even less gradual, especially at the top of the slide.
6 . CROSSFADER SECTION: The CROSSFADER (34)
of one source into another. The left side of the CROSSFADER (34)
CHANNEL 1 and the right side is CHANNEL 2. The CROSSFADER
CURVE (22) control allows you to adjust the kind of curve the
CURVE (22)
CURVE (22)
CURVE (22)
CURVE (22)
CROSSFADER CURVE (22)
CROSSFADER CURVE (22)
crossfader has. Move the CROSSFADER CURVE (22)
CROSSFADER CURVE (22)
CROSSFADER CURVE (22) control to the
right to make the curve steep and cutting (perfect for scratching). Move
the CROSSFADER CURVE (22)
CROSSFADER CURVE (22)
CROSSFADER CURVE (22) control to the left to make the curve
CROSSFADER CURVE (22)
CROSSFADER CURVE (22)
gradual and gentle. The CROSSFADER REVERSE SWITCH (19)
allows you to reverse the crossfader so that CHANNEL 2 is controlled
by the left side of the crossfader and CHANNEL 1 is controlled by the
right side of the crossfader. When REVERSE is activated the REVERSE
LED (33)
LED (33)
LED (33)
LED (33) will light.
LED (33)
NOTE: When the CROSSFADER REVERSE SWITCH (19) is activated
NOTE: When the CROSSFADER REVERSE SWITCH (19) is activated
NOTE: When the CROSSFADER REVERSE SWITCH (19) is activated
NOTE: When the CROSSFADER REVERSE SWITCH (19) is activated
NOTE: When the CROSSFADER REVERSE SWITCH (19) is activated
(moved to the right), only the crossfader reverses. The Channel Slides and
(moved to the right), only the crossfader reverses. The Channel Slides and
(moved to the right), only the crossfader reverses. The Channel Slides and
(moved to the right), only the crossfader reverses. The Channel Slides and
(moved to the right), only the crossfader reverses. The Channel Slides and
Gain do not reverse.
Gain do not reverse.
Gain do not reverse.
Gain do not reverse.
Gain do not reverse.
7 . OUTPUT CONTROL SECTION: The level of the MASTER OUTPUT
(4, 5) is controlled by the MASTER (17)
(4, 5)
(4, 5)
(4, 5)
(4, 5)
control adjusts the level of the ZONE OUTPUT (6)
output is used by some DJs to run monitor speakers in their DJ booth.
You can also use it as a second ZONE or AMP output.
NOTE: The RECORD OUT (7) has no level control. The level is set by the
NOTE: The RECORD OUT (7) has no level control. The level is set by the
NOTE: The RECORD OUT (7) has no level control. The level is set by the
NOTE: The RECORD OUT (7) has no level control. The level is set by the
NOTE: The RECORD OUT (7) has no level control. The level is set by the
channel slides and the gain controls of the selected channel.
channel slides and the gain controls of the selected channel.
channel slides and the gain controls of the selected channel.
channel slides and the gain controls of the selected channel.
channel slides and the gain controls of the selected channel.
8 . MIC CONTROL: The MIC (15)
MIC (15)
MIC (15) level controls the level of the MIC.
MIC (15)
MIC (15)
9 . CUE SECTION: By connecting a set of headphonesto the PHONES (36)
jack, you can monitor the program output, each channel individually
or both channels together. The CUE ASSIGN (20)
what to monitor and has 3 positions. Move the CUE ASSIGN (20)
the left to monitor CHANNEL 1 and CHANNEL 2 in stereo. Move the
CUE ASSIGN (20)
CUE ASSIGN (20)
CUE ASSIGN (20) to the center position to monitor the program
CUE ASSIGN (20)
CUE ASSIGN (20)
(PGM) output. Move the CUE ASSIGN (20)
CUE ASSIGN (20)
CUE ASSIGN (20) to the right to split the
CUE ASSIGN (20)
CUE ASSIGN (20)
signals from each channel so that CHANNEL 1 will be heard in one
earphone and CHANNEL 2 will be heard in the other earphone. While
the CUE ASSIGN (20)
CUE ASSIGN (20)
CUE ASSIGN (20)
CUE ASSIGN (20)
CUE ASSIGN (20) is in the left or right positions (the CHANNEL 1
and CHANNEL 2 combinations), move the CUE FADER (27)
to isolate CHANNEL 1 and to the right to isolate CHANNEL 2. Move
the CUE FADER (27)
CUE FADER (27)
CUE FADER (27) to the center to listen to both channels together
CUE FADER (27)
CUE FADER (27)
( s p l i t o r i n s t e r e o ) .
1 0 . DISPLAY: The peak hold, dual function DISPLAY (31)
MASTER
MASTER
the MASTER
MASTER
MASTER output left and right levels or the channel 1 and channel
2 levels. You can choose the option you want by pressing the DISPLAY
(25)
(25)
(25)
(25) button.
(25)
NOTE: When the DISPLAY (31) is in the channel 1/channel 2 display
NOTE: When the DISPLAY (31) is in the channel 1/channel 2 display
NOTE: When the DISPLAY (31) is in the channel 1/channel 2 display
NOTE: When the DISPLAY (31) is in the channel 1/channel 2 display
NOTE: When the DISPLAY (31) is in the channel 1/channel 2 display
mode, by adjusting the individual channel gain, you can increase or
mode, by adjusting the individual channel gain, you can increase or
mode, by adjusting the individual channel gain, you can increase or
mode, by adjusting the individual channel gain, you can increase or
mode, by adjusting the individual channel gain, you can increase or
decrease the signal to match the other channel's signal. The channel slides
decrease the signal to match the other channel's signal. The channel slides
decrease the signal to match the other channel's signal. The channel slides
decrease the signal to match the other channel's signal. The channel slides
decrease the signal to match the other channel's signal. The channel slides
and crossfader have no effect on the display readings.
and crossfader have no effect on the display readings.
and crossfader have no effect on the display readings.
and crossfader have no effect on the display readings.
and crossfader have no effect on the display readings.
CROSSFADER (34)
CROSSFADER (34)
CROSSFADER (34)
CROSSFADER (34) allows the mixing
CROSSFADER (34)
CROSSFADER (34)
CROSSFADER (34)
CROSSFADER (34) is
CROSSFADER
CROSSFADER
CROSSFADER
CROSSFADER
CROSSFADER REVERSE SWITCH (19)
CROSSFADER REVERSE SWITCH (19)
CROSSFADER REVERSE SWITCH (19)
CROSSFADER REVERSE SWITCH (19)
MASTER OUTPUT
MASTER OUTPUT
MASTER OUTPUT
MASTER OUTPUT
MASTER (17) control. The ZONE (16)
MASTER (17)
MASTER (17)
MASTER (17)
ZONE (16)
ZONE (16)
ZONE (16)
ZONE (16)
ZONE OUTPUT (6)
ZONE OUTPUT (6)
ZONE OUTPUT (6)
ZONE OUTPUT (6). HINT: The zone
PHONES (36)
PHONES (36)
PHONES (36)
PHONES (36)
CUE ASSIGN (20)
CUE ASSIGN (20) allows you to select
CUE ASSIGN (20)
CUE ASSIGN (20)
CUE ASSIGN (20)
CUE ASSIGN (20)
CUE ASSIGN (20)
CUE ASSIGN (20) to
CUE FADER (27)
CUE FADER (27)
CUE FADER (27) to the left
CUE FADER (27)
DISPLAY (31)
DISPLAY (31)
DISPLAY (31) indicates either
DISPLAY (31)
S p e c i f i c a t i o n s
S p e c i f i c a t i o n s
S p e c i f i c a t i o n s
S p e c i f i c a t i o n s
S p e c i f i c a t i o n s
INPUTS:
M i c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . 5 m V 2 K o h m b a l a n c e d
P h o n o . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 m V 4 7 K o h m
L i n e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 5 0 m V 2 7 K o h m
OUTPUTS:
M a s t e r ( b a l a n c e d ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 d B 2 V 8 0 0 O h m
CHANNEL
CHANNEL
CHANNEL
CHANNEL
M a s t e r / Z o n e ( u n b a l a n c e d ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 d B 1 V 4 0 0 o h m
R e c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 5 m V 5 K o h m
GENERAL:
G a i n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 t o - 2 0 d B
F r e q u e n c y R e s p o n s e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 0 H z - 2 0 K H z + / - 2 d B
D i s t o r t i o n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 . 0 8 %
S / N R a t i o . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . b e t t e r t h a n 8 0 d B
H e a d p h o n e I m p e d a n c e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 6 o h m
P o w e r S o u r c e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 5 V / 1 8 V A C 0 . 7 5 A
Dimensions............................10"w x 14"h x 4.33"d (254 x 355 x 110 mm)
W e i g h t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 . 5 l b s ( 3 k g )
REVERSE
REVERSE
REVERSE
REVERSE
DISPLAY
DISPLAY
DISPLAY
DISPLAY
P a g e
6
M a x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 0 V P e a k t o P e a k
M a x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 0 V P e a k t o P e a k
230V/18V AC 0.75A

Publicidad

Tabla de contenido
loading

Tabla de contenido