Kohler Sterling 5900 Serie Guía De Instalación Y Cuidado página 16

8.
Install the Rollers
Roller
Rouleau
Rueda
#8-32 x 3/8"
Handle Side
Poignée du côté
Lado de la manija
Inside Panel
Panneau intérieur
Panel interior
Inside Panel Rollers
NOTE: The steel side of the roller must be installed against the top frame flange.
Place the rollers on the top frame flange, facing the handle side of the door panel
side frame.
Secure the rollers with #8-32 x 3/8" hex washer head screws.
Outside Panel Rollers
NOTE: The steel side of the roller must be installed against the top frame flange.
Place the rollers on the top frame flange. The roller should face the bottom frame
leg.
Secure the rollers to the top frame flange with #8-32 x 3/8" hex washer head
screws.
Lay the outside door panel on a flat surface taking care to protect the glass.
Cut two 7/8" (2.2 cm) long pieces of the provided adhesive tape.
Remove the protective paper from the adhesive side of the tape and attach the
tape to the bushings.
Locate the bushings 1/4" (6 mm) from each end on the bottom frame of the
outside panel.
With the bushing tab toward the bottom frame groove, pinch the bushing legs
together and push down until the bushing tab snaps into the bottom frame
groove.
1063217-2-J
Flange
Bride
Tape
Reborde
Métre ruban
Cinta adhesiva
Tab
Languette
Lengüeta
Outside Panel
Leg/Pied/Pata
Panneau extérieur
Panel exterior
16
Groove
Rainure
Ranura
Bushing
Bague
Buje
Sterling