Complete The Installation - Kohler K-3179 Manual Del Usuario

Countertop Opening - Bottom View
Insert (Not Furnished)
Edge
Mounting
Countertop
Bracket
Opening
Fastener
1-3/8" (3.5 cm)
(Not Furnished)

2. Complete the Installation

CAUTION: Risk of product damage. Do not cut, drill, or sand the
countertop while it is positioned over the fixture.
Cut out the opening by carefully following the pencil line traced
from the template.
For laminate-type countertops, make sure all exposed
non-laminated surfaces located near the cut-out area are finished
and sealed to prevent damage from water absorption.
Drill the required faucet holes and install the faucet to the
countertop according to the manufacturer's instructions.
Equally space the required number of mounting brackets and
locate the mounting holes on the underside of the countertop
(find model number below for required number of brackets).
The type of fastener is dependent upon the countertop material
and should be recommended by a countertop supplier.
K-3179: Requires 10 mounting brackets.
K-3187: Requires 16 mounting brackets.
K-3188: Requires 20 mounting brackets.
K-3189: Requires 28 mounting brackets.
Turn the clamps parallel to the opening to allow for easy
installation of the sink.
1022023-2-B
Countertop
Sealant
Mounting
(Not Furnished)
Bracket
Fastener
Sink
(Not Furnished)
Single Basin Mounting
Countertop
Sealant
(Not Furnished)
Mounting
Bracket
Fastener
Sink
(Not Furnished)
Double Basin Mounting
4 Kohler Co.