ENGLISH
1. INTRODUCTION ...................................................................................................................................... 8
2. DESCRIPTION ......................................................................................................................................... 8
3. STRUCTURE ........................................................................................................................................... 9
4. DESCRIPTION OF TERMINALS ........................................................................................................... 10
6. DEVICE CONFIGURATION .................................................................................................................... 11
12. INSTALLATION CONSTRAINTS ............................................................................................................ 11
13. CONNECTION EXAMPLE ..................................................................................................................... 12
14. TECHNICAL SPECIFICATIONS ............................................................................................................ 13
WARNING! For a functioning of the device it is strictly necessary that the fi rmware version of the Ipercom
system is 2.0.0 or higher. The fi rmware version update of the Ipercom system is available on the Urmet
website in the Download/Software section.
1. INTRODUCTION
The device may be used:
1. To make panels with buttons only;
2. for making a calling module in combination with display module Ref. 1168/1. Connection to display
module using USB cable supplied with the IP door unit module product (Ref. 1060/48).
2. DESCRIPTION
The IP audio video door phone unit Ref. 1060/48 is dedicated to the Ipercom system. It has a one-module
mod. 1168 mechanical structure and is provided with:
•
Two calling buttons;
•
System state indication (DDA);
•
Wide-angle colour camera with LED lighting;
•
POE power;
•
LAN connection with dedicated connector (with rigid wires) or via the RJ45 adapter supplied with the
product to be used in the event that it is not possible to insert a rigid wires directly into the connector
of the external unit.
WARNING! If the RJ45 adapter is used, installation is only possible with the fl ush-mounting mode.
8
DS1060-148