Unidad De Estado Sólido; Removing The M.2 2280 Pcie Solid-State Drive - Dell Precision 3240 Compact Manual De Servicio

Steps
1. Insert the hard drive assembly into the slot on the system.
2. Slide the hard drive assembly towards the connector in the system board until the release tabs clicks into place.
Next steps
1. Install the front bezel.
2. Install the top cover (side
3. Install the side cover.
4. Follow the procedure in
Unidad de estado sólido

Removing the M.2 2280 PCIe solid-state drive

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
bezel).
after working inside your computer.
before working inside your computer.
Desmontaje y reensamblaje 35