Technoline WS 9420 Manual De Instrucciones página 5

TO READ THE MAXIMUM-MINIMUM TEMPERATURE AND HUMIDITY RECORDS
Press MAX.MIN one at a time to view the maximum or the minimum temperature and relative humidity
since the last reset.
When the maximum temperature and humidity are displayed with
MAX/MIN will clear the maximums and the unit will start to record and display fresh data again.
When the minimum temperature and humidity are displayed with
MAX/MIN will clear the minimums and the unit will start to record and display fresh data again.
TROUBLE SHOOTING
In case your wireless thermometer-clock shows irrelevant information or digits, it maybe affected by
electrostatic discharge or interferences from other devices. Press the RESET. Your unit will be reset to
default setting and you need set humidity alarm and mold alert values again.
Remark: if you observe a Low Battery icon on the lower right LCD, which means your thermo-
hygrometer is at low battery level, take out the batteries and replace with fresh ones.
PLACING OR HANGING UP THE UNIT
Insert the holder to the bottom your unit for desktop display, insert it onto the rear side of your unit for
hanging on the wall.
Since the humidity levels vary greatly according to the location, mount the unit so that it will monitor
the conditions in a location likely to be subject to the most problems.
CARE OF YOUR COMFORT INDEX TERHMO-HYGROMETER
1. Do not expose the unit to extreme temperature, water or direct sunlight
2. Avoid contact with any corrosive materials
3. Do not subject the unit to excessive force, dust or humidity
4. Do not open the inner back case or tamper with any components of this unit
5. Do not mix new and old batteries
6. Do not mix alkaline, standard (carbon zinc), or rechargeable (nickel cadmium) batteries
7. Your Thermo-Hygrometer is designed for indoor use only. Do not leave it for outdoor usage.
, press and hold the
, press and hold the
English Page 5 of 6