Before Using For The First Time - Focus Westbend 72212 Manual De Instrucciones

• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk
of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any way.
• Do not use an outlet or extension cord if the plug fits loosely or if the outlet or extension
cord feels hot.
• Do not use glass cover if chipped, cracked or has deep scratches. Weakened glass can
shatter during use. Discard immediately!
• Glass is breakable. Care should be taken not to drop or impact the glass cover. If the
cover breaks, it will do so in many pieces. Avoid or discard any foodstuffs exposed to
broken cover.
• Be extremely cautious of steam when removing cover. Lift cover slowly, directing steam
away from you.
• Do not set hot cover on cold or wet surface; let cover cool before placing in water. Sudden
temperature change may cause the cover to crack or shatter.
• Set cover on hot pad, trivet or other heat protective surface. Do not set hot cover directly
on the counter, table or other surface.
• Do not place glass cover with metal ring in the microwave oven.
• Do not set glass cover on oven burner or oven heat vent. Sudden temperature changes
may cause the cover to shatter.
• For household use only.
SAVE THESE INSTRUCTIONS
Wash the skillet and cover in hot soapy water; rinse thoroughly and dry, including the
terminal pins inside the socket of the skillet
where the temperature control fits.
To ensure stick-free cooking, lightly wipe a
teaspoon of cooking oil with paper toweling
or a soft cloth over the entire interior
surface. Let the oil remain on the surface.
If your skillet handle is not assembled to
the lid, follow these instructions. The
hardware needed for attachment of the
English - 3
B U
EFORE SING FOR THE
Strap Handle
Lid
Screws
F T
IRST
handle to the lid may be packed in a small
plastic bag or within the handle itself. For
glass lids, align the handle with the hole in
the lid, and then secure with the screw
assembly in the order shown above. DO
NOT overtighten. To attach the strap handle
to the metal lid, align the holes in the strap
handle to the holes in the lid and secure
with the screws. DO NOT overtighten.
IME