87-95 Jeep Wrangler YJ
97-06 Jeep Wrangler TJ
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-328-2409.
Important Safety Information
• CAUTION - Before driving, ensure that the Euroguard is properly secured to vehicle.
• Periodically check all components for tightness.
Tools Required
Installation
1) Remove Torx bolts from front Bumper
assembly. 2 located on each frame member
on top of the Bumper.
2) Place Euroguard on top of the bumper
and ine up the holes in the mount with the
existing holes in the frame.
3) Replace Torx bolts tighten to 45lbs
torque.
Care and Cleaning
• Rampage Bumpers are built to last; any detergent you use to wash your vehicle is sufficient to clean the
bumper. Do not use any harsh abrasive detergents. Periodically check hardware for tightness.
Congratulations!
You have purchased one of the many quality Rampage branded products offered by Lund International. We take the
utmost pride in our products and want you to enjoy years of satisfaction from your investment. We have made every
effort to ensure that your product is top quality in terms of fit, durability, finish and ease of installation.
Installation Instructions
Front Euroguard
Socket
Torx Sockets
Wrench
800-328-2409 • Visit us at Rampageproducts.com
© 2018 Lund Motion Products, Inc. All rights reserved.
Rampage Products™ is a trademark of Lund Motion Products, Inc.
Page 1 of 1
Safety glasses
The material that your product is made from can
be recycled. Please also consider recycling the
packaging that your product came in.
IS-7659 Rev.B