Rampage 8620 Instrucciones De Instalación

76-83 Jeep CJ5
76-86 Jeep CJ7
97-06 Jeep Wrangler TJ
87-95 Jeep Wrangler TJ
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at
Important Safety Information
• CAUTION - Before driving, ensure that the bumper is properly secured to vehicle.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may
vary from illustration.
Double Tube Bumper (1)
Installation
1) Remove factory front bumper
2) Remove Torx bolts from front bumper
assembly. There are 2 located on top of each
frame rail and one underneath.
3) Place new Rampage bumper over frame
and locate holes over existing holes in frame.
4) Replace Torx bolts and tighten to 45ftlbs.
Care and Cleaning
• Rampage Bumpers are built to last; any detergent you use to wash your vehicle is sufficient to clean the
bumper. Do not use any harsh abrasive detergents. Periodically check and lubricate moving parts, tire swing
pivot has a zerk fitting to grease joint.
Congratulations!
You have purchased one of the many quality Rampage branded products offered by Lund International. We take the
utmost pride in our products and want you to enjoy years of satisfaction from your investment. We have made every
effort to ensure that your product is top quality in terms of fit, durability, finish and ease of installation.
Installation Instructions
Double Tube Bumper
800-328-2409• Visit us at Rampageproducts.com
© 2018 Lund Motion Products, Inc. All rights reserved.
Rampage Products™ is a trademark of Lund Motion Products, Inc.
Page 1 of 1
Tools Required
Socket Socket Set
Wrench
The material that your product is made from can
be recycled. Please also consider recycling the
packaging that your product came in.
I-TB-20
Part Number 8620
& 8420
1-800-328-2409
Safety glasses