Philips Magnavox AJ 3720 Instructivo De Manejo página 11

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Use TUNING / ∞ or § to set the alarm time;
– With TUNING / ∞ or § pressed, the display will increase
or decrease the alarm time rapidly and continuously from
minutes to hours.
– Press TUNING / ∞ or § briefly and repeatedly to adjust
the alarm time minute by minute.
3. Select the alarm mode by selecting one of the following alarm
modes:
SLUMBER/BUZZER – For the buzzer option (this is set at a fixed
volume and cannot be adjusted)
RADIO ON – For the last station tuned to
PRESET 1-5 – To select a preset radio station
™ ALM 1 or 2 and the chosen alarm mode indication will appear
in the display:
and the preset number for the radio options
for the buzzer option.
4. To review the alarm time, press the ALARM 1 or 2 button.
IMPORTANT !
If you want the alarm to wake you up, FIRST CHECK if:
– you have adjusted the volume loud enough when using the
radio alarm modes;
– you have disconnected the headphones.
Weekend sleeper
This feature deactivates the alarm every Saturday and Sunday and
resumes the alarm function Monday to Friday.
1. Press ALARM 1 or 2.
™ The display will show the set alarm time.
2. Press WEEKEND SLEEPER once.
™ If the weekend sleeper is activated,
display for ALARM 1 or 2.
3. To cancel the weekend sleeper function, repeat steps 1 and 2
until
no longer appears in the display.
ZZ
Cancelling the alarm completely
When an alarm is cancelled, the selected alarm indication and
symbol disappear from the display.
1. To cancel the set alarm time before it goes off, press the
activated ALARM 1 or 2 button.
– The display will show the alarm time.
2. Press ALARM RESET/RADIO OFF.
– The selected alarm indication and symbol disappear from
the display.
will appear in the
ZZ
ALARM
ALM 1
AM
SLUMBER
P1 P2 P3 P4 P5
ALM 1
AM
Z Z
20 PLL DIGITAL CLOCK RADIO
5
ALM 2
11

Publicidad

Tabla de contenido
loading

Tabla de contenido