Technical Data; Filtering And Lubrication Requirements - Truper TPN-875-2 Manual De Instrucciones

Technical Data

Air Consumption
Hose Minimum Recommended Diameter
CAUTION
Please consider the increase in pressure in the line or the hose inside diameter to compensate the use of
too long hoses (more than 26 ft). The hose minimum inside diameter shall be 3/8" and the connectors shall be 1/4 NPT.
Use the right size and good quality couplers and accessories.

Filtering and Lubrication Requirements

CAUTION
Dust, water and lack of oil specific for pneumatic tools are the main cause of potential flaws with the tool. We
recommend installing a
reducing 80% oil consumption significantly increasing the breathing air quality for the operator.
• The filter-oil feeder system must be regulated to administer 3 to 6 drops per minute.
• Drain the water in the air compressor tank and also condensation in the hoses before using the tool.
Consult the air compressor instructions.
Air
Compressor
Code
Description
Air Input
Chuck
Vibration Level
Noise Level
Free Speed
Weight
Air Pressure
Brand UNI-LL-1/4 centralized filter-oil feeder system. This system assures lubrication
UNI-LL-1/4
Feeder System
TPN-875-2
Mini angular die grinder
Centralized
Filter-Oil
Air Hose
16886
1/4 NPT
1/4"
< 3.2 m/s
2
84 dB
20 000 RPM
1 lb
2.5 CFM
3/8"
90 PSI
Adapter (not
included)
ENGLISH
3