Porter Cable PCE1700 Manual De Instrucciones página 11

TO USE SPRAY WAND
The nozzles for the spray wand
are stored in nozzle holder on the
panel assembly. Colors on the
panel identify nozzle location and
spray pattern. See chart to choose
the correct nozzle for the job to be
performed.
CHANGING NOZZLES ON SPRAY
WAND
direct discharge stream toward
persons, unprotected skin, eyes or
any pets or animals. Serious injury will
occur.
of serious injury. Do not attempt
to change nozzles while pressure
washer is running. Turn engine off
before changing nozzles.
Nozzle Color
Spray Pattern
powerful
pinpoint for
Uses
very intense
cleaning
Metal or
concrete
Surfaces *
DO NOT use
on wood
*
glass, automobile paint, auto striping and trim, and delicate objects such
as fl owers and shrubs. Before spraying, check the item to be cleaned to
assure yourself that it is strong enough to resist damage from the force of
the spray.
Risk of fluid
injection. Do not
Flying objects
could cause risk
Red Yellow
0º 15º
intense
cleaning of
small areas
metal,
concrete, or
wood
The high pressure spray from your pressure washer is
capable of causing damage to surfaces such as wood,
1. Pull quick-
connect
coupler
back and
insert
nozzle.
2. Release
quick-
connect coupler and twist nozzle
to make sure it is secure in coupler.
of serious injury. Ensure nozzle is
completely inserted in quick-connect
socket and quick-connect snap ring
is fully engaged (forward) before
squeezing gun trigger.
White
40º
covers wide
areas of
cleaning
metal,
concrete,
wood, or vinyl
11 - ENG
Flying object
could cause risk
Black
low pressure
applies
cleaning
solutions
metal,
concrete,
wood, or vinyl
A17914