Blade Guide - Skymsen SI-315HD Manual De Instrucciones

PICTURE 02
01
IMPORTANT
Make sure the network voltage is the same as indicated on the cord label.
2.2.3 Blade
The Blade shall be installed with the teeth turned toward the saw front side, and downward.
To stretch the blade #. 08 (Pic.01) turn clockwise the Blade Tension Regulator Handle #.01
(Pic.01) until it stops.

2.2.4 Blade Guide

With the saw switched OFF turn the Handle #.06 (Pic.01) counter clockwise to loose the
Blade Guide #. 07 (Pic. 01).
Adjust the Blade Guide height to meet the meat piece thickness, and not more.
Then tight the handle # 06 (Pic 01)
2.2.5 Tray
The Saw model SI-315HD has a Tray #.16 (Pic.01) placed under the saw, to collect residues
To remove the tray pull it sideway until it is completely out.
To replace it follow the inverse procedure and push until it is completely in
2.2.6 Scrapers
The saw model SI-315HD has two scrapers, the wheel scraper # 19 (Pic 01) and the blade
scraper # 20 (Pic.01)
The Wheel Scraper
This scraper cleans the bone dust or the residues from the Lower Wheel during operation.
The scraper may be removed for cleaning (see item 3.3 Cleaning).
The Blade Scraper
8