Flex FX6151 Manual Del Operador página 11

WARNING
product damage due to a short circuit, never
immerse your tool, battery pack or charger
in fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc. can
cause a short circuit.
WARNING
this product until the parts are replaced. Use
of this product with damaged or missing parts
could result in serious personal injury.
This Mixer must be used only with the battery packs and chargers listed below:
2.5Ah 5Ah
FLEX FX0111 FLEX FX0121
NOTICE: Please refer to the battery pack and charger manuals for detailed operating
information.
TURNING THE MIXER ON AND OFF (FIG. 8)
The mixer features a soft start. It allows the
speed to be gradually increased up to the
maximum speed.
Turn on without locking
a. First press and hold the locking button (1)
then press the ON/OFF switch (2). Release
the locking button. The mixer will be
running for as long as the ON/OFF switch is
depressed.
b. To turn off, release the ON/OFF switch (3).
Turn on with locking
a. First press and hold the locking button (1)
then press the ON/OFF switch (2).
b. To lock into position, press the locking button
(1) once again and then release the ON/OFF
switch.
c. To turn off, briefly press and then release the
ON/OFF switch (3).
NOTICE: If the mixer does not turn after
switching on:
Remove the battery
–
OPERATING INSTRUCTIONS
To reduce the risk of fire,
personal injury, and
If any parts are damaged
or missing, do not operate
Battery Pack
8Ah
FLEX FX0221
WARNING
accessories not recommended for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious injury.
WARNING
serious personal injury, always remove the
battery pack from the tool when assembling
parts, making adjustments, or cleaning the
tool.
12Ah
FLEX FX0231
Fig. 8
1
2
Turn the power tool off (release lock by
–
pressing the switch).
Rotate the mixer paddle manually 45°.
–
Replace the battery.
–
Turn the power tool on again.
–
-11-
Do not attempt to modify
this tool or create
To prevent accidental
starting that could cause
Charger
FLEX FX0411 FLEX FX0421
3