Flex FX6151 Manual Del Operador página 13

WARNING
battery pack from the tool when cleaning or
performing any maintenance.
SERVICE
WARNING
unauthorized personnel may result in
misplacing of internal wires and
components which could cause a serious
hazard. We recommend that all tool service be
performed by a FLEX Factory Service Center or
Authorized FLEX Service Station.
GENERAL MAINTENANCE
WARNING
parts. Use of any other parts could create a
hazard or cause product damage. Periodically
inspect the entire product for damaged, missing,
or loose parts such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and
do not operate this product until all missing or
damaged parts are replaced. Please contact
customer service or an authorized service
center for assistance.
MAINTENANCE
To avoid serious personal
injury, always remove the
Preventive maintenance
performed by
When servicing, use only
identical replacement
WARNING
compressed dry air. Always wear safety
goggles when cleaning tools with
compressed air. Ventilation openings and
switch levers must be kept clean and free of
foreign matter. Do not attempt to clean by
inserting pointed objects through openings.
WARNING
plastic parts. Some of these are: gasoline,
carbon tetrachloride, chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.
CAUTION
the mixed product to dry on the paddle.
Store the tool indoors in a place that is
inaccessible to children. Keep away from
corrosive agents.
NOTICE: Do not loosen the screws on the gear
head during the warranty period.
Repairs may be carried out by an authorized
customer service center only.
-13-
CLEANING
The tool may be cleaned
most effectively with
Certain cleaning agents
and solvents damage
Clean the mixer paddle
right after use. Do not allow
STORAGE
GEARHEAD
REPAIRS