Preparing The Watch For Use - Breitling AVENGER BANDIT Manual Del Usuario

PREPARING THE WATCH FOR USE

WINDING – TIME-SETTING
Nota bene: mechanical watches endowed with a date, day,
month or moon-phase indicator are equipped with a complex
mechanism that is set into motion between 8 pm and 3 am. It is
therefore vital to avoid adjusting the calendar or moving the
time backwards during this period.
1. Unscrew the water-resistant crown in an anti-clock-
wise direction. Wind the watch by 40 clockwise turns
of the crown.
2. Pull the crown out to position 2, turn it clockwise to
adjust the calendar to the day prior to the date when
it is set into operation.
3. Pull the crown out to position 3. Turn the hands so as
to make the calendar jump once when the hands
pass through midnight. Then adjust the hour and
minute.
4. Push the crown back to position 1. Press it gently,
turning it gently in a clockwise direction, then tight-
en it again until you feel some resistance. Do not
force!
16 17
Avenger 43 CHRONO - 09.01
Avenger 43 CHRONO - 09.01