Troubleshooting; Specifications - Dynex DX-LCDTV19 Manual Del Usuario

12
4 Press VOL+ or ENTER, then press CH+ or CH– to select
Component Set.
5 Press VOL+ or ENTER. The Component Setting screen opens.
6 Press CH+ or CH– to select an option, then press VOL+ or ENTER
to confirm.
7 Press VOL+ or VOL– to adjust the option. You can select:
• H-Position–Moves the screen image left or right.
• V-Position–Moves the screen image up or down.
• Clock–Minimizes any vertical bars or stripes in the screen
image.
• Phase–Minimizes any horizontal distortions and sharpens
the screen image.
• Auto Adjust–Automatically adjust the component settings
for the best screen image.
• Setting–Resets the component settings to the factory
defaults.

Troubleshooting

Symptom
No picture and no sound
Blank screen
No sound
Poor sound
No picture on some channels
No color on some channels
Solution
• Make sure that your LCD TV
is plugged into a power
outlet.
• Make sure that the power
outlet is supplying power.
• Make sure that you have
selected the correct video
source. Press INPUT to
select the video source.
• If the power has been
interrupted, turn off your
LCD TV, then turn it on
again.
• Press MUTE to make sure
that the sound is not
muted.
• Press VOL+ to increase the
volume.
• Change the channel to
determine if the current
channel is having
difficulties.
• Adjust the sound settings.
• If you have connected a
sound system, make sure
that it is adjusted correctly.
• Make sure that the correct
channel is selected.
• Adjust the antenna.
• Adjust the picture.
• Change the channel to
determine if the current
channel is having
difficulties.
• Adjust the color.
Symptom
Spots on some channels
LCD TV is functioning
abnormally

Specifications

Specifications subject to change without notice.
NTSC, ATSC, Clear QAM
Picture and sound
system
≥
Audio output
1.5 W + 1.5 W
AV
External input ports
PC (VGA)
PC audio
S-Video
HDMI
Y Pb Pr
Antenna
~120 V
Power requirements
≤
Power consumption
60 W
Working: 41°F to 95°F (5°C to 35°C)
Temperature
Storage: 5°F to 113°F (-15°C to 45°C)
Working: 20% to 80%
Humidity
Storage: 5% to 90%
7.48 × 20.55 × 16.61 inches
Dimensions
(190 × 522 × 422 mm)
L × W × H
11.02 lbs (5.0 kg)
Weight
Remote control
Accessories
Batteries
User guide
Troubleshooting
Solution
• Make sure that the antenna
is connected correctly and
securely.
• Make sure that the antenna
and antenna cabling is in
good condition.
• Adjust the picture.
• Turn off your LCD TV,
disconnect the power cord,
wait 10 seconds, then
reconnect the power cord
and turn on your LCD TV.
• If problems persist, contact
authorized repair
personnel.