Skymsen LC2 Manual De Instrucciones página 17

PROBLEM
The machine does not switch
on.
Smoke smell or smoke.
The machine switches ON but
when the product is placed,
the motor stops or turns to
slow.
Power cord damaged.
Abnormal noises
TABLE 02
CAUSES
Lack of power.
Problem with the electric
circuits
Problem in the electric circuit.
Problem with the electric motor. Call technical assistance.
Damage during transportation.
Problem with the bearing
SOLUTIONS
Check if machine is plugged
in and if there is power in the
power supply source.
Call technical assistance
Call technical assistance.
Call technical assistance.
Call technical assistance.
17