Husqvarna Weed Eater Manual Del Operador página 6

ASSEMBLY INSTRUCTIONS
INSTALLING THE GRASS CATCHER BAG (See Figure 8)
• UNPLUG THE POWER CORD, AND WAIT FOR BLADE TO COME TO A COMPLETE STOP .
• Lift the chute cover (1)
• While holding up the cover (1), place the grass catcher bag hanger hooks (2) into the opening on the
chute cover (1) to allow the hanger hooks to attach to the rod (3) which secures the chute cover.
NOTE: For optimal performance empty grass catcher bag often during use. A full grass bag will inhibit
performance of the mower and collection of grass clippings.
INSTALLING THE SIDE DISCHARGE CHUTE (See Figure 9)
This mower has 3 different functions-mulch, side discharge, and rear bag. If you wish to discharge the
clippings rather than mulch, perform these steps.
• UNPLUG THE POWER CORD, AND WAIT FOR BLADE TO COME TO A COMPLETE STOP .
• Lift the side discharge cover (1).
• Align the slot on the discharge chute (2) with the pins on the underside of the discharge cover (1).
• Lower the discharge chute (2) until the hooks on the mower deck are secured in the openings in the
discharge chute (2).
• Release the side discharge cover (1).
1
3
ENGLISH - 5
2
Fig. 8
1
2
Fig. 9