Changing The Reversible Door - Danby DKC052BSL2DB Guía De Utilización Y Cuidado Para El Propietario

Barril refrigerador
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Instructions

Changing the Reversible Door

This keg cooler has a door that can be set to open from the left or right side. This unit is delivered to you with the door
opening from the left side. To reverse the opening direction, please follow the instructions below.
1
4
1. Undo the three (3) screws in each bracket using a Phillips screwdriver.
2. Remove the screws and bracket. Place to one side.
3. Slide the door down about 15 cm (6") and off the top hinge pin and lift away.
4. Use a fl at head screwdriver to remove te pin from the top bracket. Replace it in the hinge bracket on the opposite
side.
5. Remove the screw from the side of the fridge where the bracket is to be re-fi tted.
6. Slide the fridge door back onto the top hinge, making sure it's the right way up. Screw the bottom hinge into place on
the new side.
7. Check that the door is aligned horizontally and vertically and that the seals are closed on all sides before fi nally tight-
ening the bottom hinge. Re-adjust the leveling legs.
CAUTION
To avoid personal injury to yourself and/or property, we
recommend that someone assist you during the door
reversal process.
2
5
7
3
6
13

Publicidad

Tabla de contenido
loading

Tabla de contenido