Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2. WELL POINT (DRIVEN POINT) APPLICATION (Fig.2)
Parts you may need for this application
ITEM
DESCRIPITON
1
1-1/4in. Galv. Steel Pipe
2
1-1/4in. Drive Coupling
3
1-1/4in. Brass Check Valve
4
1-1/4in. PVC MPT x S Male Adapter
5
6
1-1/4in. PVC TEE FPT x FPT x FPT
7
1-1/4in. PVC Slip x Slip Union
8
3/4in. CPVC CTC Socket Tee Fitting
9
3/4in. PVC 90-Degress S x S Elbow
10
1in. PVC 90-Degress S x S Elbow
3. APPLICATION FOR SURFACE WATER (Fig.3)
6
Well Point
Pipe with a pointed screen is driven into the ground below the
water table. The depth is usually less than 25 feet. Available
diameters are 1" through 2.
QTY
ITEM
some
11
1in. x 3/4in. PVC Reducing Male Adapter
some
12
3/4in. PVC MPT x S Male Adapter
1
13
2
14
1
15
1
16
1
17
1
18
1
19
1in. MIP x 3/4in. FIP PVC Bushing Fitting
1
20
One pipe goes into lake, river, cistern or ponds, suction lift is
less than 25'.Install a screen around the inlet pipe to prevent
the entrapment of swimmers, wildlife and debris.
CAUTION: Possible contamination. Do not use surface water
for drinking. The installation shown could be used for sprinkler
applications.
For Professional Technical Support call 1-844-242-2475
DESCRIPITON
3/4in. PVC Slip x Slip Union
1-1/4in. Galvanized Plug
1-1/4in. PVC rigid Pipe
1in. PVC rigid Pipe
3/4in. PVC rigid Pipe
1in. Discharge Priming Tee
20 Gal. or larger Tank
QTY
2
1
1
1
some
some
some
1
1
1
Publicidad
Tabla de contenido
Solución de problemas
