Manual Tuning - Classic Phono TCD-2570 Manual De Usuario

FM RADIO OPERATION
ANTENNA
For FM and DAB reception there is a built-in rod antenna (28) at the rear of the unit. Extend the antenna
and move around to obtain the best reception signal.
Operation
1. Switch ON the POWER ON/OFF BUTTON (15). The Display (18) will light up.
2. Press sequentially the FUNCTION BUTTON (6) to select the FM radio manual tuning and look for the
desired radio station by turning the TUNING/ENTER KNOB (21).
AUTOMATIC TUNING
1. During FM working mode, press the MENU BUTTON (19), then turn the TUNING/ENTER KNOB (21) to
select the "SCAN SETTING".
2. Turn again TUNING/ENTER KNOB (21) and select the option between ALL STATIONS and STRONG
STATIONS ONLY. Press the TUNING/ENTER KNOB (21) to confirm.
3. Press the SCAN BUTTON (32) and the unit will scan all of the FM stations.
RADIO DATA SYSTEM INFORMATIONS
During FM working mode, press the INFO BUTTON (31) to display the following informations: PROGRAM
TYPE/PROGRAM NO/AUDIO BITRATE/TIME/DATE.
FM & FM-Stereo Reception
• Stereo reception is possible when the tuned FM station is broadcasting in stereo.
• Press the MENU BUTTON (19) until select "'AUDIO SETTING", then press the TUNING/ENTER KNOB
(21) and turn again the TUNING/ENTER KNOB (21) to select between FORCED MONO or STEREO
ALLOWED.
DAB OPERATION
1. Press sequencially the FUNCTION BUTTON (6) to select DAB mode.
2. Extend the DAB antenna at the back of the unit.
AUTOMATIC TUNING
1. Press the MENU BUTTON (19), then move the TUNING/ENTER KNOB (21) to select FULL SCAN.
2. Press the TUNING/ENTER KNOB (21) to start searching the DAB/DAB+ station.

MANUAL TUNING

1. Press the MENU BUTTON (19), then move the TUNING/ENTER KNOB (21) to select MANUAL TUNE.
2. Turn the TUNING/ENTER KNOB (21) to tune manually the desired station.
3. When tuned a DAB stereo station, the "stereo" will show on the LCD.
4. During DAB reception, press the INFO BUTTON (31) to see the information of the playing DAB station
on the display, i.e Program Type/Program No./Frenquency Range/Signal Strength/Time/Date.
10