User Maintenance - Andis WDS-1 Instrucciones De Uso Y Cuidado

USER MAINTENANCE

If shaver is to remain unused for a long period of time, store in a safe, cool,
dry place. Do not wrap cord tightly around shaver. Do not hang the shaver
by the power cord. Other than the recommended maintenance described in
this manual, no other maintenance should be performed. To contact Andis
directly, please call our Customer Support Team at 1-800-558-9441 or
email us at support@andisco.com.
CLEANING
(Refer to Figure B for this section)
Regular cleaning is necessary in order to maintain the optimal
performance and maximum comfort from your shaver.
1. Turn shaver off by switching ON/OFF switch to the OFF position.
2. Slide the foil assembly release button to the right to release the foil
assembly. Lift assembly off of shaver.
3. Use the small cleaning brush provided to gently brush away any hair that
has collected inside the shaving head. Clean all parts of the shaving head
except the foil.
4. Rinse the foil assembly and cutting heads with water and allow to air dry
completely.
5. Once fully dry, place the foil assembly back on to the shaving head.
USE GUIDELINES FOR LITHIUM-ION BATTERIES
1. The lithium-ion battery included with your shaver does not develop a
"memory effect" like a nickel-metal hydride (NiMH), or nickel cadmium
(NiCd) battery. You can return the shaver to the charger at any time for a
full charge, or even use the battery before a charge cycle is complete.
Like most rechargeable batteries, lithium-ion batteries perform best when
used frequently.
2. For maximum battery life, store the shaver in a partially discharged
condition if it will not be used for several months. To discharge the
battery, run the shaver until it automatically shuts off.
3. Avoid locating the shaver near heat vents, radiators, or in direct sunlight.
Optimum charging will result where the temperature is stable. Sudden
increases in temperature can result in the battery receiving less than a full
charge.
4. Many factors influence lithium-ion battery life. A battery that has received
heavy use or is more than a year old may not give the same run-time
performance as a new battery pack.
5. New lithium-ion batteries, unused for a period of time, may not accept
a full charge. This is normal and does not indicate a problem with the
battery or charger. The battery will accept a full charge after several
cycles of shaver use and recharging.
6. Disconnect the charger or the shaver from the AC outlet if extended
periods of non-use are anticipated.
6