TIMER
1. Press MODE four times and then press SET °C/°F once.
2. Press SNOOZE to set the hour value and then press SET °C/°F to go to the next setting.
3. Press SNOOZE to set the minute value.
4. Press SET °C/°F to start the timer.
5. Press MODE once to exit timer mode and return to clock mode.
To deactivate the timer:
To turn the timer off, press SET °C/°F four times until only lines appear on the screen. To return to clock
mode, press MODE once.
CALENDAR
1. Press MODE three times.
2. Press SET °C/°F once: the hour digit starts flashing.
3. Press SNOOZE to change the setting value. Then press SET °C/°F to move to the next setting.The setting
sequence is displayed in the following order:
Hours
4. Press MODE twice to go back to clock mode.
To deactivate the calendar:
To turn the calendar off, press SET °C/°F four times until only lines appear on the screen. To return to clock
mode, press MODE twice.
Note: Only one event can be recorded at a time. The alarm will ring for 5 minutes when time and date of
event has been reached.
NIGHTLIGHT
Press the Projector button
PROJECTOR
Press the Projector button
Dimensions
Batteries
RL975seriesIM1223_27May_V09.indd 9
Minutes
Year
Month
to switch the nightlight on. Press again to stop it.
to project stars onto the ceiling. Press again to turn the projector off.
H102 x W125 x D99 mm
3 x AA/LR6 1.5V
Day of the week.
Specifications
9
27/05/2013 10:42 AM