IKEA TRADFRI Manual Del Usario página 4

ENGLISH
WIRELESS DIMMER FUNCTIONS
ON/OFF: Rotate fast for 100% Brightness
and OFF.
Dim up/down: Rotate slowly for dimming
up/down.
Pairing: Add IKEA Smart Lighting
products to your system. See
instructions below.
ADDING DEVICES TO YOUR
WIRELESS DIMMER
When the wireless dimmer is sold together
with a light source (in the same package),
they are already paired.
To add light sources, just repeat the steps
below.
1 Make sure that your light source is
installed and the main power switch is
turned on.
2 Hold the wireless dimmer close to the
light source you want to add (no more
than 5 cm away).
3 Press and hold the pairing button
for at least 10 seconds, you can find
the pairing button under the top cover.
A red light will shine steadily on the
wireless dimmer. Your light source
will begin to dim and flash one time to
indicate that it has been successfully
paired.
Up to 10 light sources can be paired with 1
wireless dimmer.
Make sure to pair them one at a time. If
the light sources are close to each other,
disconnect those that have already been
paired from the main power switch.
REMOVING DEVICES FROM
YOUR WIRELESS DIMMER
1 Make sure the main power switch is
turned on for the light source you want
to un-pair from your TRÅDFRI wireless
dimmer.
4