Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

instruction manual
water softener

WARNINGS FOR THE USER

- This equipment must not be used by children or by people
with physical, mental or sensory impairments, or by people
lacking experience, unless they be supervised by someone
responsible for their safety, or they received instructions
regarding the correct and safe way to use the equipment
and were warned of the risks.
- Never try to repair the equipment by yourself: you may
cause damage. Ask your seller for assistance.
- Never touch or use the water softener with wet or damp
hands or feet, or barefoot.
- For regular salt refillings, read the chapter on the mainte-
nance for the user (see chapter 11, "MAINTENANCE FOR
THE USER").
1) INTRODUCTION AND GENERAL INFORMATION
1.1 OBJECTIVE OF THE MANUAL
This instruction manual is addressed to qualified personnel
who has knowledge of the electric safety and health norms of
the place of installation. The objective of this manual is to give
useful information and warnings, both to the installer and the
user, regarding:
• How to store and keep the equipment before use:
- Place and room conditions
- Expiry date
• For the Installer:
- Precautions for hygienic and electric safety
- Equipment description and characteristics
- Place and mode of installation
- Activation
- Programming
- Maintenance
- Procedures to follow after a period of inactivity of the equi-
pment
- Equipment disposal
- Solutions to some problems
• For the User:
- Periodic salt refilling
- Instructions for the periodic rinsing of the resins
- Instructions for the care and cleaning of the equipment
- Health and hygiene warnings concerning the water produ-
ced by the equipment.
The manual also gives you the guidelines to avoid an impro-
per use of the equipment and it specifies the installer and
the user's responsibilities, therefore we suggest reading
through this manual before installing or using the water
softener.
If the dispositions are not followed, the manufacturer will de-
cline responsibility for any damage caused to people, things or
animals, and will consider the guarantee null and avoid.
1.2 STORAGE OF MANUAL
This manual is an integral part of the product. It must be kept
with care by the user and it must accompany the equip-
ment, even in case of a propriety transfer.
1.3 EQUIPMENT IDENTIFICATION
The equipment is identified by the numbers, written in bold on
the bottom left side of the softener's label.
You can find the label on the salt container (fig. 3, G), on the
package and on the back of this manual.
Istruction Manual REK VOLUMETRIC/CHRONOMETER
REK
VOLUMETRIC
CHRONOMETER
1.4 DECLARATION OF COMPLIANCE
This product complies with the Community Regulations and
national laws applicable at the moment of its entrance in the
market.
As it is not included in the IV ATTACHMENT present in the
2006/42/CE DIRECTIVE, the producer has taken all the neces-
sary steps to self-certification to apply the CE branding on the
label on the salt container.
The declaration of compliance signed by the manufacturer is
available on request and online.
1.5 HYGIENIC SAFETY NORMS AND ICIM TESTING
This equipment has been tested by the ICIM Institute of Italian
Certificated for the Mechanic, licensed credited labora-tory ,
certificated to the compliance with:
• Reg. n.1935/2004/CE products and components contact
with food elements according to the dispositions MOCA.
It is NECESSARY to use original replacements for repairs and
maintenance, to guarantee hygienic safety.
1.6 RECOMMENDATIONS AND WARNINGS
For the Storage:
- Store the water softener in a dry place
- The temperature in the storage must be between 0 to 35°C
- We recommend using the equipment within 24 months.
For the Installer:
We suggest installing the equipment after carefully reading
the instruction manual. If complications arise, we suggest
asking your seller for assistance. The seller's information is
written on the last page of this manual.
The manufacturers are not responsible for any damage
or harm that may derive by not following these precau-
tions.
2) ABOUT THE EQUIPMENT
2.1 FUNCTIONING PRINCIPLE
The cationic resins in the softener's tank transform calcium
carbonate in sodium carbonate, which is water-soluble at the
working temperatures of both coffee makers and ice makers
machines.
The transfer of sodium ions between the resins and water is
imperative to soften drinking water, but this process tends to
decline in proportion to the flow rate and the consumption
of water. For this reason, it is necessary to regenerate the
exhausted resins by making water and salt flow through them,
therefore returning them to their active state.
The resins gradually lose their cationic function, and conse-
quently their efficiency, with each regeneration. We recom-
mend replacing them after seven years of use.
To guarantee the correct functioning of the resins, it is impor-
tant to periodically refill the salt in the brine tank (fig. 8).
The salt will be automatically taken, in the form of salt water,
during the regeneration cycle.
2.2 THE PACKAGING CONTAINS:
• 1 REK water softener with cationic resins adapt for softe-
ning
• 1 instruction manual
• 4 metres of unloading pipe
• 1,5 metres tube for overflow
2.3 TECHNICAL FEATURES
Size (fig. 5):
A - Width [mm]:
B - Depth [mm]:
ENGLISH
REK
275
445
17

Publicidad

Tabla de contenido
loading

Tabla de contenido