To Change The Product To Mulching Mode; To Use The Product With The Grass Catcher; To Change The Product To Rear-Side Discharge Mode - Husqvarna L 321AH Manual Del Usuario

Ocultar thumbs Ver también para L 321AH:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To stop the engine, release the engine brake handle.
To use the product with the grass
catcher
WARNING: Do not operate the product
without a grass catcher installed or without
the rear deflector closed. Objects can eject
and cause injury to the operator.
1. Lift the rear deflector and remove the mulch plug.
2. Assemble the grass catcher, refer to
the grass catcher on page 8 .
3. Put the grass catcher on the bracket.
4. Release the rear deflector and put it on top of the
grass bag frame.
10
To change the product to mulching
mode
The mulching mode of the product makes grass
clippings smaller. The grass clippings then fall onto the
lawn and scatter across the grass. Mulched grass
biodegrades quickly to give nutrients for the lawn.
1. Lift the back shield and remove the grass bag, if it is
2. Put the mulch plug into the collector channel.
3. Let the back shield close and make sure it tightly
To change the product to rear-side
To assemble
discharge mode
1. Lift the rear deflector and remove the mulch plug.
installed.
closes against the mulch plug.
1240 - 001 - 08.07.2019

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido