Before Use - Albrecht Tectalk Easy 2 Manual Del Usuario

15
18
17
16
3

Before Use

To insert batteries into the devices, first remove the belt
attachment: While pulling the belt clip latch (15) away from the
unit, push up on the belt clip (16) to remove it from the device.
Open the battery compartment (17) and insert 3 AAA alkaline
or NiMH cells (18) (not supplied), ensuring that the poles are
correctly aligned. Then close the lid. The arrows indicate in
which direction the parts need to be moved. NiMH cells must
be fully charged before first use. To do so, connect an USB
power supply to the micro-USB socket of the device (19). The
charging time is about 10 hours. Never charge alkaline cells.
16 English