Fluidmaster PerforMAX K-400H-001 Guía De Instalación Rápida página 9

STEP 6: FINISHING STEPS
A: ATTACH WATER SUPPLY
CONNECTOR TO FILL VALVE
Twist to the right (counterclockwise)
*Hand-tighten only. DO NOT OVER
TIGHTEN.
B: TURN ON WATER
Check for leaks.
(See Troubleshooting for leak solutions)
C: WATER LEVEL
After the tank stops filling, water level should fill the tank to
roughly ½ inch below top of overflow pipe to ensure a
proper flush.
* Over tightening may crack the fill valve or tank causing flooding. Make sure the float
cup does not touch the tank walls or tank lever and flush valve.
RIGHT
Top of
Overflow Pipe
Water Level
Overflow Pipe
TURN
COUNTER-
CLOCKWISE
1/2"
9