SNOWJOE SJ626E Manual Del Operador página 8

Fig. 3
Extension
cord restraint
hook
4. Secure the connection of the upper frame to the middle
frame by fastening the second set of knob and bolt on
each side (Fig. 4).
Fig. 4
Middle frame
5. Clip on the 3 cable clips on the frame, and insert the cable
inside the cable clips (Fig. 5).
Fig. 5
Cable clips Cable
Chute Crank Assembly
1. Remove the cotter pin from the lower chute crank (Fig. 6).
Fig. 6
Upper frame
2. Install the lower crank rod by inserting it into the opening
at the back of the housing with holes aligned (Fig. 7).
Fig. 7
Upper
frame
Knob + bolt
Align the holes
3. Secure the lower chute crank in place with the cotter pin
(Fig. 8).
Fig. 8
4. Remove the thumbscrew on the crank rod connector by
hand (Fig. 9).
8
Cotter Pin
Lower chute crank
Lower chute crank
Cotter pin