Ninja BL830 Serie Guia Del Usuario página 14

Assembly and Use for the 72 oz. Pitcher - cont.
WARNING: Never leave the appliance unattended while in use.
USE
Fig. 6
7 Plug the motor base in for use.
8 Turn the Variable Speed Dial to speed 1.
(Fig. 6) The power indicator light ( ) will now turn
on.
To start the blender, press the "Start/Stop/Pulse"
toggle up to start processing. Slowly increase to
desired speed.
NOTE: As a safety feature, the power
indicator light ( ) will flash and the motor
will not work if the pitcher and lid are not
installed correctly.
NOTE: If you need to Pulse ingredients press down
on the toggle in short intervals.
9 When you have reached your desired consistency,
reduce speed slowly and stop the unit by pressing
up on the Start/Stop/Pulse toggle. (Fig. 7)
10 Use the convenient pour spout when serving
smoothies, juices and other beverages you have
created! Push the pour spout back as far as it
will go before pouring. For thicker consistencies,
remove the lid and the top blades carefully (by the
shaft), then empty the contents from the pitcher.
11 To remove the lid, press the release button on the
lid, pull the lid handle up to a 90° angle and lift
the lid off. Holding the pitcher with one hand while
removing the lid with the other will provide the
best leverage. Turn the pitcher counter clockwise
and then lift off the base. Do not pour out
ingredients without first carefully removing the top
blades. (Fig. 8)
13
1.877.646.5288
REMOVAL
Fig. 7
CAUTION: Never insert your hands in the pitcher
as the blades are sharp. Always use a spatula to
dislodge food that has stuck to the sides of the
pitcher.
12 Make sure that the unit is unplugged when not in
use.
TIPS:
• Use low speed settings (1-3) when blending
• Use medium speed settings (4-6) when
• Use high speed settings (7-10) when creating
• For softer ingredients, the bottom fixed blades
Fig. 8
drinks and other blended items.
frozen blending, ice crushing or grinding dry
ingredients.
purees such as sauces, dips and restaurant
quality glazes. Top blades are needed to power
through tough ingredients like ice, solid fruits
and vegetables. If silky smooth results are
desired, push down on the power toggle to turn
off the power, carefully remove the top blades,
replace the lid and continue processing.
are enough to fully process in one step.