Key To Symbols; Symbols - Husqvarna DT600 Manual De Instrucciones

Symbols

WARNING!
A dehatcher can be a dangerous tool if
used incorrectly or carelessly, which
can cause serious or fatal injury to the
operator or others. It is extremely
important that you read and understand the contents of
this Operator's Manual.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• A protective helmet where there is a
risk of falling objects
• Approved hearing protection
• Approved eye protection
• A breathing mask should be used when there is a risk
of dust.
This product is in accordance with
applicable EC directives.
The operator of the machine must
ensure, while working, that no
persons or animals come closer than
15 meters.
Always wear approved protective
gloves.
Wear sturdy, non-slip boots.
Keep all parts of your body away from
the hot surfaces.
Warning: rotating parts. Keep hands
and feet clear.
2 – English

KEY TO SYMBOLS

Watch out for thrown objects and
ricochets.
Noise emission to the environment
according to the European
Community's Directive. The
machine's emission is specified in
the Technical data chapter and on the
label.
Other symbols/decals on the machine refer to
special certification requirements for certain
markets.
The engine is switched off by moving
the stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug cap must be
removed from the spark plug when assembling, checking
and/or performing maintenance.
Always wear approved protective
gloves.
Visual check.