Assembly; Assembling The Dethatcher Accessory - Husqvarna DT600 Manual De Instrucciones

Assembling the dethatcher
accessory
B
A
E
The arrow on the gear housing indicates the direction of
rotation. The gear housing is to be placed as illustrated.
IMPORTANT! The moss dethatcher rollers are marked
with arrows showing the direction of the rotation. Make
sure the moss dethatcher rollers are fitted correctly. The
moss dethatcher rollers must be fitted slightly displaced
in relation to each other.
The moss dethatcher springs should point in the same
direction as the rotation direction arrow shown on the
gear housing.
C
B
D

ASSEMBLY

1 Press the left moss dethatcher (A) onto the left drive
shaft from the gear housing (E).
2 Fasten the moss dethatcher roller with split pin (B) into
the outer hole in the shaft.
A
A B
E
C
–
English 9