Safety Instructions; General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - STERWINS ETHT2-50.3 Manual De Instrucciones

2. SAFETY INSTRUCTIONS

General Power Tool Safety Warnings

3
0
WARNING!Read all safety warnings and all instructions.
electric shack, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.

Work area safety

1.Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
2.Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3.Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.

Electrical safety

1. Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keepcord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric
EN
Failure to follow the warnings and instructions may result in
212