Marshalltown Bullet BT92-2195 Manual Del Usuario página 2

INTRODUCTION
Thank you for your purchase of the Bullet Vinyl Cutter. This vinyl cutter is Made in the USA with the highest-
grade materials and designed with the flooring professional in mind.
Your new Bullet Vinyl Cutter includes features such as:
• Quiet, "fixed blade" action to cut inside without dust, noise, or electrical cords
• Safer and faster than a chop saw
• Convenient case built into the table for easy transportation
• Replaceable blade
• Replaceable polymer anvil
• No-tool set up required
• Blade that lasts up to 5,000 sq. ft. installed before sharpening is needed
And can cut materials up to 7/16" (12mm) thick and 91/2" (241mm) wide, including:
• LVP/LVT/VCT/SPC/WPC/HDPC
• Vinyl Plank Flooring
NOT for use on bamboo, hardwood, engineered hardwood or laminate.
This owner's manual provides the information needed to operate and maintain this Bullet Vinyl Cutter. Carefully
read and follow all safety and operating instructions in this manual. Ensure every operator of this vinyl cutter
reads this manual before operating the unit. The replacement of any part on this vinyl cutter by other than the
manufacturer's authorized replacement part may adversely affect the performance, durability, or safety of the
product.
Be sure safety precautions are observed. Read and follow all safety and operating instructions in this
operator's manual. The manufacturer reserves the right to make changes on or add improvements to its
product at any time without prior notice or obligation. The manufacturer reserves the right to decide, upon its
sole discretion and at any time, to discontinue this product.
This manual covers the Bullet Vinyl Cutter. For technical questions or repair parts, please call MARSHALLTOWN
customer service at 1-800-888-0127 or visit www.MARSHALLTOWN.com.
2 of 10
WS2639
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com