AUDIOropa xepton-NX TRX Instrucciones De Servicio página 22

2.4 ID selection
Within a channel, each TRX needs to have a dif-
ferent ID from »00« to »99«. Every channel with a
TRX must have a TRX set to the master-ID »00«,
which defines it as the master transmitter of the
group. The icons »M« (master) and »Micropho-
ne« (talk enabled) are indicated on the display as
soon as the ID is set to »00«.
To set the ID, continue as follows: On the powe-
red-up device, press and hold the MODE-button
for 3 seconds. The symbol »CH« on the display
will blink. Press the MODE-button again. The
symbol »ID« will start to blink. By means of the
» « and » « buttons, select an ID from »00« to
 
»99«, while taking care that each TRX within the
channel has its own number.
After the selection, wait for 3 seconds to set the
selected ID number.
Any ID setting apart from »00« will cancel the
master function and the icon »M« will disappear.
English 22