AUDIOropa xepton-NX TRX Instrucciones De Servicio página 24

2.7 Monitoring function On / Off
The monitoring function enables you to hear your
own voice over the system. Proceed as follows if
you wish to activate the monitoring function:
On the powered-up device, press and hold the
MODE-button for 3 seconds. The symbol »CH« in
the display will blink.
Press the MODE button two times. The »SO«
symbol in the display blinks. By using the » «

and » « buttons, select »SO« to activate the mo-

nitoring function or SF to deactivate it. After the
selection, wait for 3 seconds to set the selected
function.
Please note:
The default setting is »SF« (monitoring deactiva-
ted).
English 24