Transmitting And Receiving - AUDIOropa xepton-NX TRX Instrucciones De Servicio

2.5 Transmitting and receiving

The TRX with the master-ID »00« is automati-
cally enabled to transmit and receive. In order
to activate transmission on other TRX within the
channel:
On the powered-up device, press the MUTE but-
ton for 2 seconds. The microphone icon is indi-
cated on the display and the device is ready to
transmit. To end the transmission function, press
the MUTE button again for 2 seconds. The micro-
phone icon will disappear from the display and
the device is set to reception only.
If a non-master TRX is only intended for recep-
tion, no further action is required after switching
it on.
Up to 3 devices can send at the same time: The
master unit and 2 others.
Please note:
If transmission is activated on a further TRX, the
first TRX in the activation sequence loses its right
to transmit. The master unit is not affected.
2.6 Volume up / down
The volume can be adjusted through 6 levels
from muted to maximum. On the powered-up de-
vice, press the » « and » « buttons to adjust the
 
volume as desired.
English 23