Würth 1952 003 930 Traducción Del Manual De Instrucciones De Servicio Original página 17

1952 003 937) and D (1952 003 938) to the central body
and insert the tool on the injector to be extracted (fig. 7)
- Tighten the four screws fastening the two lateral plates (fig.
8) and fasten the tool to the injector using the nut M12x1.5
included in the kit.
Once fastened the tool on the injector, tighten the pin with the
impact mass to the dowel M10 and proceed with the injector
extraction operating manually with impact mass (fig. 9).
5
6
7
8
9
17