Operating Your Machine - Garland BGS 2400 Manual De Instruccion

Warning! When the cylinder that carries blades is moving, you could hurt
yourself!
Keep your hands and feet away from the orifices when the machine is on.
Warning! Danger of particle projection! Keep away from the filling orifice and
from the expulsion zone and make sure to keep people away at a minimum
distance of 15 m.
Warning! Danger of discharge!
Remove the plug before carrying out any operation in the machine.

OPERATING YOUR MACHINE

Start up
Verify that the tension of the mains corresponds to the indications of
the informative plate.
Connect the cable extension.
On and off
The hopper feeder should be empty.
1. To turn the machine on press the buttom
2. To turn the machine off press the buttom
Warning
The cylinder that carries blades continues running for a short period of time after
turning the machine off.
Changing the direction of the rotation
Before changing the direction of the rotation, always turn the machine off
and wait until the cylinder that carries the blades stops.
Turn the direction of rotation switch to the right (continuous operation):
This moves and grinds the waste.
Turn the direction of rotation switch to the left (continuous operation):
The clogged waste is expelled.
When the switch is in an intermediate position, "0", the cylinder that carries
blades works backwards (automatic impulse):
The clogged waste is expelled
22