Safety
Safety
General instructions
The control unit must only be installed and put into operation by a qualified electrician.
The applicable safety regulations and accident prevention regulations must be
observed.
Safety instructions
WARNING!
Exposed, live cables.
Danger of electric shock!
•
Only work on the control unit when it is de-energised.
CAUTION!
Destruction of the control unit and other devices through incorrect mounting!
•
Only use the intended infrared receiver types.
•
Only use the intended wires.
•
Ensure that the external pushbutton is designed for the mains voltage.
•
Do not wire the control lines, pushbutton lines or DMX output lines with an
external voltage, especially not a mains voltage of 230 V.
•
Carefully observe wire preparation in order to ensure that the push-in terminals
function properly.
•
The control unit is designed for cabinet installations (DIN 43880) only.
•
Adhere to the DMX standard.
•
The safety of the system and the compliance with relevant installation standards
subjects to the constructor of the system.
26
EASY DMX SO
XII 2009