Brush Head; Removing The Batteries - Philips sonicare Advance 4000 Serie Manual Del Usuario

4235 020 00392 16-12-2005 08:51 Pagina 11
C
C
Storage
If the product is not to be used for an extended period of time it
should be unplugged from the electrical outlet, cleaned, stored in a cool
and dry area away from direct sunlight.The cord wrap can be used to
store power cord in an organized manner.
Replacement

Brush head

Replacing your brush head every 6 months is clinically proven to
remove more plaque.
Use only Sonicare Advance replacement brush heads.
Environment
HANDLE CONTAINS NICKEL CADMIUM
BATTERIES. BATTERIES MUST BE RECYCLED OR
DISPOSED OF PROPERLY.
The batteries inside your Sonicare cannot be replaced, but are easily
removed for recycling. At the end of product life and prior to disposal,
please remove the batteries from the handle by following the
instructions below.
◗ To help protect our environment, we encourage you to recycle at
approved recycling locations. Do not dispose of the batteries in
normal household waste.

Removing the batteries

Please note that this process is NOT reversible.
To remove the batteries yourself, you will need a flat-head (standard)
screwdriver and a small towel. Basic safety precautions should be observed
when following the procedure outlined below. Be sure to protect your
eyes, hands, fingers and the surface on which you are working.
1 With the brush head still attached to the power handle,
completely deplete the batteries of electrical charge by pressing
the power button and running a brushing cycle until it stops.
Repeatedly run brushing cycles until the handle will no longer activate
the brush head.
2 Remove the brush head from the handle.
3 Split the handle open by inserting the screwdriver head all the
way through both slots on the top part of the handle throat,
where the brush head was previously attached.
ENGLISH
11