Brushing Technique - Philips sonicare Advance 4000 Serie Manual Del Usuario

4235 020 00392 16-12-2005 08:51 Pagina 8
ENGLISH
8
C
C
1
2
4
3

Brushing technique

Follow these simple steps to maximize your brushing experience.
1 Before turning the Sonicare on, place the bristles of the brush
head on your gumline at a 45-degree angle.
2 Hold the handle with a light grip, turn the Sonicare on, and
glide the brush across your teeth.
3 To maximize Sonicare's effectiveness use light pressure and let
the Sonicare toothbrush do the brushing for you. Do not scrub.
4 To make sure you brush evenly throughout the mouth, divide
your mouth into 4 sections: outside top, inside top, outside
bottom and inside bottom teeth. Begin brushing in section 1
(outside top teeth) and brush for 30 seconds before moving to
section 2 (inside top teeth). Continue brushing for 30 seconds
in each section progressing through all 4 sections until you've
brushed for 2 minutes.
5 After the 2-minute brushing cycle is complete, additional time
should be spent brushing the chewing surfaces of your teeth.
Press the power button to turn the brush on and off as needed.
To clean your mouth more completely, you may also brush your
tongue, with the toothbrush turned on or off, as you prefer.
Features
Easy-start\ brushing power ramp-up
◗ All Sonicare models come with the Easy-start feature activated
(on), which helps you get used to brushing with Sonicare.
◗ Brushing power will gently increase to full power over the first
12 brushings.
◗ The Easy-start feature is active if you hear 2 beeps immediately
after turning on your Sonicare. Once you reach optimal brushing
power (after the 12th brushing), you will no longer hear the
double beep at the beginning of your brushing routine.
◗ Note: each of the first 12 brushings must be at least 1 minute in
length to properly move through the Easy-start ramp-up cycle.
To turn off or reactivate the Easy-start feature:
1 Attach your brush head to the handle.
2 Place the handle in a plugged-in charger base.