Camera & VOD
Take Single Still Image (
1. Set the mode selector to
.
2. Before taking a shot, you can set the following preview menu
options. To move between each menu, use up/down navigation
keys.
]
Resolution(
) : Select the desired resolution from
VGA(640x480), QVGA(320x240), QQVGA(160x120) or
Phonebook(
) using left/right navigation key.
]
Zoom(
): You can zoom in/out using left/right navigation key.
Note
When the resolution is VGA(640x480), the zoom value is fixed to x1.
]
Rotation(
): You can rotate the preview image 0, 90, 180 or
270 degrees using the left/right navigation keys.
]
Flash(
): You can turn the flash on/off using the left/right
navigation keys.
3. After setting, focus on the subject to capture, then press the OK key
or camera hot key (
or
).
4. With a click, the image is captured. And Save(
MMS(
) menus appear on the left of the image.
]
Save(
): Saves the captured image.
]
Delete(
): Deletes the captured image and returns to the
previous state. You can also return by pressing the Clear key or
the right soft key.
]
MMS (
): Select this to send a MMS message using this
captured image.
Take multiple shots in succession (
1. Set the mode selector to
.
2. Before taking a shot, you can set the following preview menu
options. To move between each menu, use up/down navigation
keys.
]
Resolution(
) : Select the desired resolution from
VGA(640x480), QVGA(320x240), QQVGA(160x120) or
G7200 User Guide
)
), Delete(
) and
)
72
Camera & VOD
Phonebook(
) using left/right navigation key. The number of
multi-shots is fixed as followings: VGA:3 shots, QVGA:6 shots,
QQVGA/Phonebook:9 shots
]
Zoom(
): You can zoom in/out using left/right navigation key.
Note
When the resolution is VGA(640x480), the zoom value is fixed to x1.
]
Rotation(
): You can rotate the preview image 0, 90, 180 or
270 degrees using the left/right navigation keys.
]
Flash(
): You can turn the flash on/off using the left/right
navigation keys.
3. After setting, focus on the subject to capture, then press the OK key
or camera hot key (
or
).
4. With a click, the image is captured. And Save(
menus appear at the left of the image.
]
Save(
): Saves the captured image.
]
Delete(
): Deletes the captured image and returns to the
previous state. You can also return by pressing the Clear key or
the right soft key.
Take Still Image with various frames (
1. Set the mode selector to
.
2. Before taking a shot, you can set the following preview menu options.
To move between each menu, use up/down navigation keys.
]
Frame(
) : Select the desired one among 10 preset frames
using left/right navigation key. The Resolution is fixed to
QCIF(176x144)
]
Zoom(
): You can zoom in/out using left/right navigation key.
Note
When the resolution is VGA(640x480), the zoom value is fixed to x1.
]
Rotation(
): You can rotate the preview image 0, 90, 180 or
270 degrees using the left/right navigation keys.
]
Flash(
): You can turn the flash on/off using the left/right
navigation keys.
G7200 User Guide
) and Delete(
)
73
)