Mounting instruction
Foldable maintenance support
Intended use:
The foldable maintenance stand may only be used in lift installations according to EN81-1/2 and EN81-20/-21.
The foldable maintenance stand is intended to provide a temporary safety space in the shaft. The installation is
permitted beneath the car respectively the counterweight in the pit only.
Warning notices:
The assembly has to be effected by qualified persons* only.
!
When mounting all corresponding safety regulations and measures for the
assembly of lifts are to be considered.
Assembly, disassembly and maintenance can only be carried out if the lift
!
system is switched off.
All indications in the mounting instruction including the service are
!
absolutely to be followed.
Keep the instruction for later use!
*Qualified person (corresponding to EN81-20):
A person who has been trained accordingly and disposes of expertise based on knowledge and experience, and who is equipped with the
necessary instructions to be able to safely effect the required maintenance or control of the lift, or the rescue of passengers.
© W+W 02.2019-Version 10
551405
5