Vort Hrw 30 Mono Evo Installation - Vortice VORT HRW 30 MONO EVO Manual De Instrucciones

ENGLISH

VORT HRW 30 MONO EVO installation

Fig 1 ÷ 11
NOTE: before proceeding with the installation, remove the internal protective packaging in the appliance.
NOTE: before carrying out installation, remove the spacers inside the PVC installation pipe (provided as
accessory) and cut the pipe according to the wall thickness.
It is mandatory to install VORT HRW 30 MONO EVO within a perimeter wall with a thickness of at least 260 mm.
1 1
≥260 mm
IN
2
2°÷3°
OUT
ø
mm 102
29