Installation - Vortice VORT HR 300 NETI Manual De Instrucciones

ENGLISH

Installation

Note: The device is not suitable for outdoor installation. The device must be installed in compliance with the safety
regulations in force in the destination country and with the instructions in this manual. The device must be installed on a
surface or wall inside the dwelling that is structurally suitable to support its weight (max 20 kg). Adhesives cannot be used
for device installation. The connection of ventilation ducts to the machine must be carried out with the aid of a tool.
Assembly
The device can be installed on a wall (fig. 3-7).
4 4
3 3
6 6
5 5
29